Edukasi Bahaya Kebisingan Pada Pekerja Sektor Informal Kota Surabaya
DOI:
https://doi.org/10.55338/jpkmn.v4i3.1255Keywords:
Noise Physical Noise Measurement ControlAbstract
One of the risks that can occur in the workplace is the risk of physical factors, namely noise. The physical environment is one of the important factors to play a role in the occurrence of work accidents. The role of factors in the work environment is very large with the occurrence of Occupational Safety and Health problems. To create a safe and comfortable work environment, it is necessary for workers and companies to apply Occupational Safety and Health when doing work. Noise is an unwanted sound in the work area due to production equipment or production machinery. The results of the initial survey through observation and hazard assessment using JSA and calculation using the CARL method. It was found that the highest risk assessment was the physical factor of noise. Therefore, the purpose of community service is carried out to prevent the existence of physical factor hazards, namely noise. Taking measurements using a Sound Level Meter, from the results of noise measurements that have been taken, there are work areas that exceed the Threshold Value (NAB), which gets a value of 87.92dB. It can be concluded that there is a high value of noise intensity, it should receive attention by controlling hazards that can be applied to the informal sector of PT.X, namely reducing production machine tools on the floor and moving them to the next floor, it can also be controlled by using Personal Protective Equipment (PPE), namely ear plugs when all production machine tools are operating.
Downloads
References
Notoatmodjo.(2018).MetodologiPenelitian Kesehatan. Jakarta: PT.RhinekaCipta
Darlani, D., & Sugiharto, S. (2017). Kebisingan Dan Gangguan Psikologis Pekerja Weaving Loom Dan Inspection Pt. Primatexco Indonesia. JHE (Journal of Health Education), 2(2), 130-137.
Nasution, M. (2019). Ambang batas kebisingan lingkungan kerja agar tetap sehat dan semangat dalam bekerja. Buletin Utama Teknik, 15(1), 87-90.
Endiarni, A. E. (2020). Terapan 5S dalam Peningkatan Produktivitas berdasarkan Permenaker Nomor 5 Tahun 2018. HIGEIA (Journal of Public Health Research and Development), 4(2), 201-211.
Anggraini, D. R., Fitrianingsih, Y., & Akbar, A. A. Analisis Tingkat Kebisingan dan Persebarannya Menggunakan Metode Noise Mapping Pada PLTD Siantan, Kalimantan Barat. JURLIS: Jurnal Rekayasa Lingkungan Tropis Teknik Lingkungan Universitas Tanjungpura, 2(2), 11-20.
Afrizal, R. (2023). Intensitas bising dan pemetaan kebisingan dengan surfer 13 sebagai upaya meminimalisir dosis kebisingan di lingkungan kerja PT Hok Tong Jambi (Doctoral dissertation, Teknik lingkungan).
Bhakti, B. I. (2021). Pengaruh Faktor Lingkungan Fisik Kerja Terhadap Kejadian Kecelakaan Kerja Pada Pekerja Pengrajin Aluminium Di Kelurahan Gadang Kota Malang: Bimo Ikrar Bhakti Nim. 1610.13251. 237.
Permenaker RI. 2018. Peraturan Menteri Ketenagakerjaan Republik Indonesia Nomor 5 tentang Keselamatan dan Kesehatan Kerja Lingkungan Kerja. Jakarta: Menteri Ketenagakerjaan Republik Indonesia.
Widiastuti, Febriana.,2009, Penilaian faktor fisik lingkungan kerja di bagian produksi sebagai upaya pencegahan penyakit akibat kerja di PT. Phapros tbk Semarang, Fakultas Kedokteran, Universitas Sebelas Maret. Tugas akhir yang dipublikasikan.
Badan Standar Nasional Indonesia,2009, Metoda Pengukuran Intensitas Kebisingan Di Tempat Kerja SNI 7231:2009, diakses 6 Juli 2023
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Syahriatul Hikmiah Syahriatul, Friska Ayu, Julianti Saffana Zahra, Ridwan Khafid Alfaridzi, Merry Sunaryo

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.


