Edukasi Perawatan Fiberglass Pada Kapal Long Boat Menggunakan Metode Material Komposit Di Pulau Rutum, Kepulauan Ayau, Raja Ampat

Boby Wisely Ziliwu; Rezza  Ruzuqi; Bagas  Prakoso; Marcelinus P.  Saptono

doi:10.55338/jpkmn.v4i2.1084

Authors

Boby Wisely Ziliwu, Politeknik Kelautan dan Perikanan Sorong , Indonesia
Rezza Ruzuqi, Politeknik Kelautan dan Perikanan Sorong , Indonesia
Bagas Prakoso, Politeknik Kelautan dan Perikanan Sorong , Indonesia
Marcelinus P. Saptono, Politeknik Saint Paul Sorong, Indonesia

DOI:

https://doi.org/10.55338/jpkmn.v4i2.1084

Keywords:

Rutum Island Fiberglass Boat Material Composit Fiberglass

Abstract

The diversity of Indonesia's wealth is marked by the number of small islands, natural resources are still unexplored. The West Papua province has the outermost islands, one of which is Rutum Island. Rutum Island is one of the islands in the Ayau Archipelago (West Papua Province). The people of Rutum, mostly use boats that are less than 15 meters in size to carry out fishing activities and so on. Most of the ships are made of Fiberglass reinforced Polymer Composite Material. The condition of the area is surrounded by coral reefs. So many ships were damaged. The ship maintenance process is very difficult, because the condition of the area is far from the city center. In general, the ship maintenance process adjusts to the level of damage to the ship. On the island of Rutum, the ship's damage to the lower hull suffered loss of the ship's walls. The use of appropriate standards, needs to be applied so that the ship provides a sense of security and comfort for users. The method used in this activity is the material compossit method. Then patch the damaged parts with a resin-catalyst alloy reinforced with fiberglass Woven Roven 600 and Chopped Strand Mat 450. The number and variety of layers are adjusted according to the reference. The results obtained show a strong patch. However, if viewed from the damage, there needs to be additional repairs. This is because, the main material of the ship is already porous due to sea water.

Downloads

Download data is not yet available.

References

Azissyukhron, M., & Hidayat, S. (2020). Perbandingan Kekuatan Material Hasil Metode Hand Lay-up dan Metode Vacuum Bag Pada Material Sandwich Composite. Prosiding Industrial Research Workshop and National Seminar, 9, 1–5.

Chung, Deborah D.L. 2010. Composite Materials. Springer : London Dordrecht Heidelberg.

Callister Jr, William D, 2009. Materials Science And Engineering An Introduction, 8th Edition. New Jersey : John Wiley & Sons, Inc, Hoboken

Fachruddin, F., Asri, S., Firmansyah, M. R., & Mustafa, W. (2021). Penggunaan Kobalt-Aerosil Komponen Fiberglass Pada Pelapisan Lambung Perahu Nelayan Rumput Laut Dusun Pattontongan Jeneponto. 4, 226–239.

Hasibuan, R. L. (2018). Tinjauan Hukum Tentang Penjarahan Pulau terluar Indonesia. Jurnal Warta, 56(April).

Karang, T. (2018). Laporan Status Ekologi Kawasan Konservasi Perairan Kepulauan Ayau-Asia.

Marzuki, I., Zubaydi, A., & Ma’ruf, B. (2017). Kajian Penerapan Aturan Klasifikasi Pada Laminasi Struktur Konstruksi Lambung Kapal Ikan Fiberglass 3 GT. Wave: Jurnal Ilmiah Teknologi Maritim, 11(1), 15–22. https://doi.org/10.29122/jurnalwave.v11i1.2055

Ruzuqi, R. (2020). Impact Strength Analysis of Polymer Composite Materials (PCM) Fiber Reinforced in the Fiberboat Application. Material Science Research India, 17(2), 170–178. https://doi.org/10.13005/msri/170209

Ruzuqi, R. (2021). Analysing the Impact Strength of Polymer Composite Materials (PCM) Fiber Reinforced in the Fiberboat Application. Recent Trends in Chemical and Material Sciences Vol. 1, 17(2), 71–81. https://doi.org/10.9734/bpi/rtcams/v1/2857f

Sulasminingsih, S., Setyawan, B. A., Marasabessy, A., Studi, P., Industri, T., Selatan, J., Studi, P., Perkapalan, T., & Selatan, J. (2017). STUDI EKONOMI TEKNIK PEMBUATAN PERAHU CADIK JENIS. 13, 205–213.