doi:10.55338/jumin.v6i3.5831

Authors

Universitas Nurtanio
Universitas Nurtanio

DOI:

https://doi.org/10.55338/jumin.v6i3.5831

Keywords:

Prototype, bottle waste, micro controller, internet of things, web application

Abstract

This research aims to design and build a prototype of a bottle waste exchange machine into points based on the Internet of Things (IoT). The city of Bandung faces serious problems related to waste management, especially plastic bottle waste. Similar conditions occur in the Nurtanio University Bandung environment, low student awareness of the importance of environmentally friendly waste management worsens this situation. The prototype of the bottle waste exchange machine into points is expected to provide a solution by automating the process of waste identification, sorting and collection. This machine prototype uses a NodeMCU ESP8266 microcontroller as a control center. Inductive and capacitive proximity sensors are used to detect waste types. The IoT system allows real-time monitoring and management of the machine through a mobile application. In testing, the machine successfully identified plastic bottles, glass and cans with a high level of accuracy. The implementation of this Smart Recycling Machine is also equipped with a user-friendly web interface and mobile application, making it easier for users to operate and monitor exchange transactions. Data obtained from these sensors is sent to the server via a Wi-Fi network, then processed and displayed in the form of information that is easy for users to understand. In addition, this machine is also able to provide periodic reports on the amount and type of waste that has been exchanged by users, which can be used for further analysis purposes. The results of the study indicate that the use of IoT technology in waste management can increase the efficiency of the recycling process and provide ease of monitoring. It is hoped that the implementation of this machine can increase student awareness of the importance of good waste management and support environmental conservation efforts in the Nurtanio University Bandung environment.

Downloads

Download data is not yet available.

Author Biographies

, Universitas Nurtanio

Teknik Informatika

, Universitas Nurtanio

Informatics Engineering

References

Z. Munawar, “Social Bisnis Ekosistem,” in Social Media Marketing, 1st ed., Padang: Get Press Indonesia, 2023, p. 239.

S. Pal, H. N. A, S. Auddy, S. Kumar, S. Pandey, and R. Singh, “Waste management using Internet of Things (IoT),” in Annual Industrial Automation and Electromechanical Engineering Conference (IEMECON), 2017, pp. 359–363.

Z. Munawar, Y. Herdiana, Y. Suharya, and N. I. Putri, “Pemanfaatan Teknologi Digital Di Masa Pandemi Covid-19,” Temat. J. Teknol. Inf. Komun., vol. 8, no. 2, pp. 160–175, Dec. 2021.

Hartatik, M. E. Koibur, A. W. Murdiyanto, and Z. Munawar, Sains data : strategi, teknik, dan model analisis data, First. Bandung: Kaizen Media Publishing, 2023.

S. Kasulla, S. J. Malik, and S. Zafar, “The Role of IoT in Waste Management and Sustainability,” Partners Univers. Int. Res., vol. 3, no. 2, pp. 76–88, 2024.

M. Ling and L. Xu, “Incentivizing household recycling crowds out public support for other waste management policies: A long-term quasi-experimental study,” J. Environ. Manage., vol. 29, no. 1, p. 77, 2021.

J. B. Bassey, “Challenges and Opportunities of Plastic Waste: A Case Study of Akure Metropolis,” Int. J. Sci. Eng. Res., vol. 11, no. 5, pp. 1546–1552, 2020.

I. Sosunova and J. Porras, “IoT-Enabled Smart Waste Management Systems for Smart Cities: A Systematic Review,” IEEE Access, vol. 10, no. 4, pp. 73326–73363, 2022.

G. Mukherjee and S. Dhiman, Waste Management and Sustainable Development: Challenges and Opportunities. CRC Press, 2022.

A. Salam, Internet of Things (IoT) for Environmental Sustainability, 2nd ed. Berlin, Heidelberg: Springer, 2024.

K. Liu, “A global perspective on e-waste recycling,” Circ. Econ., vol. 2, no. 2, pp. 1–16, 2024.

Z. Munawar and N. I. Putri, “Keamanan IoT Dengan Deep Learning dan Teknologi Big Data,” Temat. J. Teknol. Inf. Komun., vol. 7, no. 2, pp. 161–185, Dec. 2020.

Z. Munawar and C. K. Sastradipraja, Visi Komputer : Konsep, Metode, dan Aplikasi, 1st ed. Bandung: Kaizen Media Publishing, 2023.

Z. Munawar, “Pertimbangan Umum Keamanan Pada Mobile Computing,” Temat. - J. Teknol. Inf. dan Komun., vol. 2, no. 1, pp. 72–84, Jun. 2015.

W. S, J. S. Pasaribu, R. T. R. . Bau, and Z. Munawar, Layanan digital di era 5.0, First. Padang: Get Press Indonesia, 2023.

F. Welle, “Twenty years of PET bottle to bottle recycling—An overview,” Resour. Conserv. Recycl., vol. 55, no. 11, pp. 865-875 Resources, Conservation and Recycling, 2011.

A. Kokoulin, A. A. Yuzhakov, and S. V Polygalov, “Beverage Container Collecting Machine Project,” in IOP Conference Series Earth and Environmental Science, 2019, pp. 1–9.

S. Puig and N. Foukia, “CleverTrash: an IoT system for waste sorting with deep learning,” in EEE International Conferences on Internet of Things (iThings) and IEEE Green Computing & Communications (GreenCom) and IEEE Cyber, Physical & Social Computing (CPSCom) and IEEE Smart Data (SmartData) and IEEE Congress on Cybermatics (Cybermatics), 2022, pp. 1–8.

M. Se, V. Ganapathy, and R. Balaji, “Efficient IOT Based Smart Bin for Clean Environment,” in International Conference on Communication and Signal Processing (ICCSP), 2018, pp. 0715–0720.

Y. Sengupta and S. Mukherjee, “A Reward-based Framework for Recovery and Utilization of Recyclable Wastes using Blockchain,” in OITS International Conference on Information Technology (OCIT), 2022, pp. 609–613.

D. Mariya, J. Usman, E. N. Mathew, H. PH, and A. Azeez, “Reverse Vending Machine for Plastic Bottle Recycling,” Int. J. Comput. Sci. Trends Technol., vol. 8, no. 2, pp. 65–70, 2020.